Allied Telesis AR2050V Command Reference Manual page 1203

BGP BGP4+ C
AND OMMANDS
- -
NEIGHBOR AS ORIGINATION INTERVAL
The as-origination-interval time value is the minimum amount of time between
the advertisement of Update messages sent from a BGP speaker to report changes
within the local AS. This is the minimum time between two Update messages to
iBGP peers, which contain a prefix that originates from the same AS. See the
neighbor advertisement-interval
eBGP peers.
Use this command instead of the
iBGP peers with prefixes in the same AS for updates only within a local AS.
awplus#
Examples [BGP]
awplus(config)#
awplus(config-router)#
as-origination-interval 10
awplus#
awplus(config)#
awplus(config-router)#
as-origination-interval
Examples awplus#
[BGP4+]
awplus(config)#
awplus(config-router)#
as-origination-interval 10
awplus#
awplus(config)#
awplus(config-router)#
as-origination-interval
Validation show bgp ipv6 neighbors (BGP4+ only)
Commands
show ip bgp neighbors (BGP only)
Related neighbor advertisement-interval
Commands
address-family
C613-50186-01 Rev B
configure terminal
router bgp 100
neighbor 10.10.0.1
configure terminal
router bgp 100
no neighbor 10.10.0.1
configure terminal
router bgp 100
neighbor 2001:0db8:010d::1
configure terminal
router bgp 100
no neighbor 2001:0db8:010d::1
Command Reference for AR2050V
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
command to set time between messages to
neighbor advertisement-interval command for
1203