Ip Ospf Authentication - Allied Telesis AR2050V Command Reference Manual

OSPF C
OMMANDS

IP OSPF AUTHENTICATION

ip ospf authentication
Overview This command sets the authentication method used when sending and receiving
OSPF packets on the current VLAN interface. The default is to use no
authentication. If no authentication method is specified in this command, then
plain text authentication will be used.
The no variant of this command disables the authentication.
ip ospf [<ip-address>] authentication [message-digest|null]
Syntax
no ip ospf [<ip-address>] authentication
Mode Interface Configuration for a VLAN interface or a PPP interface.
Usage Use the
the
In this example, VLAN interface vlan2 is configured to have no authentication.
Example
This will override any text or MD5 authentication configured on this interface.
awplus#
awplus(config)#
awplus(config-if)#
In this example, PPP interface ppp0 is configured to have no authentication. This
will override any text or MD5 authentication configured on this interface.
awplus#
awplus(config)#
awplus(config-if)#
Related ip ospf authentication-key
Commands
area authentication
ip ospf message-digest-key
C613-50186-01 Rev B
Parameter
<ip-address>
message-digest
null
ip ospf authentication
ip ospf message-digest-key
configure terminal
interface vlan2
configure terminal
interface ppp0
Command Reference for AR2050V
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
Description
The IP address of the interface.
Use the message digest authentication.
Use no authentication. It overrides password or message-
digest authentication of the interface.
command to specify a Simple Text password. Use
command to specify MD5 password.
ip ospf authentication null
ip ospf authentication null
933