Redistribute (Ospf) - Allied Telesis AR2050V Command Reference Manual

OSPF C
OMMANDS
(OSPF)
REDISTRIBUTE

redistribute (OSPF)

Overview Use this command to redistribute routes from other routing protocols, static
routes and connected routes into an OSPF routing table.
Use the no variant of this command to disable this function.
Syntax redistribute {bgp|connected|rip|static} {metric
<0-16777214>|metric-type {1|2}|route-map <name>|tag
<0-4294967295>}
no redistribute {bgp|connected|rip|static} {metric
<0-16777214>|metric-type {1|2}|route-map <name>|tag
<0-4294967295>}
Default The default metric value for routes redistributed into OSPF is 20. The metric can
also be defined using the
defined using the
with this command.
Mode Router Configuration
Usage You use this command to inject routes, learned from other routing protocols, into
the OSPF domain to generate AS-external-LSAs. If a route-map is configured by
this command, then that route-map is used to control which routes are
redistributed and can set metric and tag values on particular routes.
The metric, metric-type, and tag values specified on this command are applied to
any redistributed routes that are not explicitly given a different metric,
metric-type, or tag value by the route map.
See the
about metrics, and about behavior when configured in route maps.
Note that this command does not redistribute the default route. To redistribute the
default route, use the
C613-50186-01 Rev B
Parameter
bgp
connected
rip
static
metric
metric-type
route-map
tag
set metric
OSPF Feature Overview and Configuration Guide
default-information originate
Command Reference for AR2050V
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
Description
Specifies that this applies to the redistribution of BGP routes.
Specifies that this applies to the redistribution of connected
routes.
Specifies that this applies to the redistribution of RIP routes.
Specifies that this applies to the redistribution of static routes.
Specifies the external metric.
Specifies the external metric-type.
Specifies name of the route-map.
Specifies the external route tag.
set metric command for a route map. Note that a metric
command for a route map overrides a metric defined
for more information
command.
963