Allied Telesis AR2050V Command Reference Manual page 1564

IGMP IGMP S C
AND NOOPING OMMANDS
-
IP IGMP QUERY INTERVAL
To reset the period between sending IGMP host-query messages to the default
(125 seconds) for vlan10, use the following commands:
awplus#
awplus(config)#
awplus(config-if)#
Related ip igmp query-holdtime
Commands
ip igmp query-max-response-time
ip igmp startup-query-interval
show ip igmp interface
show running-config
C613-50186-01 Rev B
configure terminal
interface vlan10
no ip igmp query-interval
Command Reference for AR2050V
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
1564