Service-Name - Allied Telesis AR2050V Command Reference Manual

PPP E (PPP E) C
OVER THERNET O
-
SERVICE NAME

service-name

Overview Use this command to configure the PPPoE service name offered by the Access
Concentrator (AC).
Use the no variant of this command to remove the service offered by the AC.
Syntax service-name {any|<service-name> [advertised]}
no service-name {any|<service-name>}
Default No PPPoE service is configured by default.
Mode PPPoE Access Concentrator Configuration
Example To set the PPPoE AC labelled 'ISP-service' to provide service to any client
requesting it, regardless of the service name they request, use the commands:
awplus#
awplus(config)#
awplus(config-pppoe-ac#
To offer a private (unadvertised) PPPoE service "internet" and an advertised PPPoE
service "remote-office" to a client, use the commands:
awplus#
awplus(config)#
awplus(config-pppoe-ac)#
awplus(config-pppoe-ac)#
To remove the non-matching (any) PPPoE service so that it is no longer offered to
a client, use the commands:
awplus#
awplus(config)#
awplus(config-pppoe-ac)#
C613-50186-01 Rev B
OMMANDS
Parameter Description
<service-name>
The name of the service to be offered.
any
The service should be provided to any client requesting it,
regardless of the service name they request.
advertised
Whether the service is advertised to other clients.
configure terminal
pppoe-ac ISP-service
configure terminal
pppoe-ac ISP-service
configure terminal
pppoe-ac ISP-service
Command Reference for AR2050V
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
service-name any
service-name internet
service-name remote-office advertised
no service-name any
634