Ftp Access With Password Ftpaccs - ABB Relion 670 Series RES670 Technical Manual

Section 20
Basic IED functions
20.3
20.3.1
20.3.2
20.3.3
Table 586: FTPACCS Non group settings (basic)
Name Values (Range)
PortSelection None
Front
LANAB
LANCD
Any
SSLMode FTP+FTPS
FTPS
TCPPortFTP 1 - 65535
706

FTP access with password FTPACCS

Identification
Function description
FTP access with SSL
FTP access with TLS, FTPACCS
The FTP Client defaults to the best possible security mode when trying to negotiate with
TLS.
The automatic negotiation mode acts on configured port number 21 and server features,
it tries to negotiate with explicit TLS via AUTH TLS. If the specified port is any other, it
tries to negotiate in a similar way.
Using FTP without TLS encryption gives the FTP client reduced capabilities. This mode
is only for accessing disturbance recorder data from the IED.
If normal FTP is required to read out disturbance recordings, create a
specific account for this purpose with rights only to do File transfer. The
password of this user will be exposed in clear text on the wire.
Settings
Unit Step
- -
- -
- 1
IEC 61850 IEC 60617
identification identification
FTPACCS -
Default Description
Any Port selection for communication
FTPS Support for AUTH TLS/SSL
21 TCP port for FTP and FTP with Explicit SSL
Phasor measurement unit RES670 2.1 ANSI
1MRK 511 365-UUS A
ANSI/IEEE C37.2
device number
-
Technical manual