Configuration; Ftp Access; Ftp Access Via Internet Explorer - ABB Aztec 600 User Manual

Aztec 600 aluminium, ammonia, color, iron, manganese, phosphate
Single- and multi-stream colorimetric analyzers
D.7 Configuration
Note. A user must be logged-on for the configuration
button to be enabled.
D.8 FTP Access
Files can be transferred between the analyzer and a remote
computer via an FTP connection if the analyzer has been
configured with the appropriate settings – see Appendix D,
page 90.
Either Microsoft Internet Explorer version 5.5 (or later) or
MS-DOS can be used as an FTP client.
D.9 FTP Access via Internet Explorer
Note. FTP access requires Internet Explorer version 5.5 or
later.
Before data can be accessed via FTP, Internet Explorer must be
configured with the appropriate options.
To ensure that the latest data file is copied, Internet Explorer
must be set to check for newer versions of stored pages on
every visit to a page. Internet Explorer must also be set to
enable FTP access.
To configure Internet Explorer:
1. From the Internet Explorer 'Tools' menu select 'Internet
Options'.
2. In the 'General' tab of the displayed dialog box, click the
'Settings' button in the 'Temporary Internet Files'
grouping.
3. From the options for 'Check for newer versions of stored
pages:', select 'Every visit to the page' and click 'OK'.
4. Select the 'Advanced' tab of the 'Internet Options' dialog
box, ensure that the 'Enable folder view for FTP sites
option' under the 'Browsing' heading is selected and click
'OK'.
92
To access data stored on the analyzer via Internet Explorer:
1. Start Internet Explorer.
2. In the 'Address' bar, enter 'ftp://' followed by the IP
address of the analyzer from which the files are to be
copied. A log-in dialog box is displayed:
3. Type the 'User name' and 'Password' and press enter.
The folders that are present on the analyzer are displayed.
4. Open the folder containing the file to be displayed. The
files within the folder can be displayed in any standard
Explorer view (small icon, large icon, list or details) by
selecting the appropriate option from the 'Views' menu.
Note. The SDMMC folder is visible only if an SD card
is present and logging is set to 'On-line' – see Section
9, page 51.
5. Files/Folders can be copied to/from the analyzer.
Note. An audit log entry is created and displayed for
each FTP logon giving details of the logon user name
and access (full or read-only). When Internet Explorer
is used as the FTP client, two log-ons are performed
at the start of each session, resulting in two log
entries.
Appendix D – Web Server
IM/AZT6CR–EN Rev. J