Configuration Level Menus; Security; Common; Channels - ABB C1300 Quick Start Manual

12 C 1 3 0 0/A DVA N C E D C I R C U L A R C H A R T R E C O R D E R | C I/C 1 3 0 0 - E N R E V. C

9 Configuration level menus

Security

The security code, set to '0' when the recorder is despatched,
can be set to any value from 0 to 9999. When set to anything
other than '0', access to all configuration menus (i.e. all menus
below Security Code) is prevented. Enter the correct code to
enable access to the configuration menus.

Common

The common configuration menu is used to configure any
standard features on the unit, such as chart and display
options.
Chart Duration
Stop chart source
Auto Pen drop
Pen lift enable
Configuration Password
Line Rejection
Pen Channel Display
Totals display
Other Channels display
Alarm Adjust
Totalizer Reset
Contrast 1 (2)
Brightness 1 (2)

Channels

The channels configuration menu is used to configure the
inputs associated with pens 1 to 4. The following parameters
are available for configuration:
Pen 1(4) input type
Pen 1 (4) linearizer type
Pen 1 (4) units
Pen 1 (4) electrical High
Pen 1 (4) electrical low
Pen 1 (4) decimal point
Pen 1 (4) engineering High
Pen 1 (4) engineering low
Pen 1 (4) chart high
Pen 1 (4) Chart low
Pen 1 (4) broken sensor drive
Pen 1 (4) fault detect level
Pen 1 (4) filter
Pen 1 (4) off tag
Pen 1 (4) In Tag
Pen 1 (4) out tag
Pen 1 (4) In source
Pen 1 (4) out source

Alarms

The alarms configuration menu is used to configure all 16
available process alarm settings. The following parameters are
available for configuration:
Alarm Type
Alarm trip
Alarm Hysteresis (Eng. units)
Alarm Time hysteresis