Security Events On Protocols Secalarm - ABB Relion 670 Series RES670 Technical Manual

Section 18
Station communication
18.14
18.14.1
18.14.1.1
18.14.1.2
Table 569: SECALARM Non group settings (basic)
Name Values (Range)
Operation Disabled
Enabled
18.15
18.15.1
686
The MULTICMDRCV function block has 16 binary outputs, all controlled through the
command block of one or many MULTICMDSND function blocks. There are 60
instances of the MULTICMDRCV where the first 12 are fast (8 ms), and the others are
slow (100 ms). Additionally, the MULTICMDRCV has a supervision function, which
sets the output connector "VALID" to 0 (zero) if its block does not receive any data within
the time defined by tMaxCycleTime.
LON connections are established using LON network tool (LNT).

Security events on protocols SECALARM

Security alarm SECALARM
Signals
Table 568: SECALARM Output signals
Name Type
EVENTID INTEGER
SEQNUMBER INTEGER
Settings
Unit Step
- -
Activity logging parameters ACTIVLOG
Activity logging ACTIVLOG
ACTIVLOG contains all settings for activity logging.
There can be 6 external log servers to send syslog events to. Each server can be configured
with IP address; IP port number and protocol format. The format can be either syslog
(RFC 5424) or Common Event Format (CEF) from ArcSight.
Description
EventId of the generated security event
Sequence number of the generated security event
Default Description
Enabled Operation On/Off
Phasor measurement unit RES670 2.1 ANSI
1MRK 511 365-UUS A
Technical manual