Lucent DDM-2000 OC-3 User And Service Manual page 52

IXL-001
: System Turnup/Circuit Order
Page 4 of 44
DO ITEMS BELOW IN ORDER LISTED. . . . . FOR DETAILS, GO TO
Service —Establish Initial T1
Establish Initial T1 Service —
(Group Equipped But Not In Service) . . . . . . . . . . . . . . . . .System Turnup: NTP-033
Service — Establish Initial OC-3c (STS-3c)
Establish DDM-2000 OC-3c (STS-3c) Service . . . . . . . . . .System Turnup: NTP-002
Circuit Order/Work Order Procedures
NOTE:
Some of these procedures are used to add, convert, or discontinue DS1
and/or DS3 service after the system is running with initial service. Other
procedures are used to add new shelves and optical spans and upgrade
system configurations.
Shelf/Span — Adding New
Add DDM-2000 OC-3 Node (Shelf) —
To Path Switched Ring
Shelf Added in Middle of Optical Span . . . . . . . . . . . . . . . . . Circuit Order: NTP-026
Add DDM-2000 OC-3 Optical Span —
Span Added as Extension to
DDM-2000 OC-3 Ring . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Circuit Order: NTP-015
Add DDM-2000 OC-3 Shelf and Optical Span —
Shelf Added as Extension to DDM-2000 OC-12 . . . . . . . . . . Circuit Order: NTP-018
Add OC-3 Optical Span Linear Extension —
Extension Added Between FT-2000
and DDM-2000 OC-3 or OC-12 Ring. . . . . . . . . . . . . . . . . . . Circuit Order: NTP-049
Shelf/Span — Discontinue
Span — OC-3 Optical — Discontinue . . . . . . . . . . . . . . . . . . Circuit Order: NTP-019
Discontinue DDM-2000 OC-3 or OC-12 Node (Shelf) —
From DDM-2000 OC-3 or OC-12 Path Switched Ring . . . . . Circuit Order: NTP-027
DDM-2000 OC-3 M
Issue 3, June 2001
ULTIPLEXER
363-206-285