Lucent DDM-2000 OC-3 User And Service Manual page 38

363-206-285
Issue 3, June 2001
DO ITEMS BELOW IN ORDER LISTED . . . . .FOR DETAILS, GO TO
5. If required, perform DS1 transmission tests on each DS1 port.
A. Single Ring Configuration
B. Dual Ring (DRI) Configuration
C. Single/Dual Homing Configuraiton
6. If required, perform DS3 transmission tests on each DS3 port.
A. Single Ring Configuration
B. Dual Ring (DRI) Configuration
C. Single/Dual Homing Configuration
7. If required, perform OC-3c transmission tests.
8. Verify/set option settings using rtrv-ne/set-ne: commands.
9. Verify/set option settings using rtrv-( )/set-( ):
commands.
DDM-2000 OC-3 M
Acceptance:
ULTIPLEXER
NTP-002
Page 2 of 2
DLP-510
DLP-554
DLP-510
DLP-511
DLP-553
DLP-511
DLP-544
DLP-512