Lucent DDM-2000 OC-3 User And Service Manual page 633

TAP-103
: Trouble Clearing
Page 3 of 4
14. Determine reason for locks, inhibits, etc. to be in place. See the Commands
and Reports section of this manual for a description of the switch-( )
commands and the rtrv-alm: command report descriptions. Use the
switch-( ) commands to reset switching mode or priority.
If you need assistance, notify your supervisor, your local technical support
organization, or call Lucent Technologies RTAC, per local operating
instructions.
15. STOP. YOU HAVE COMPLETED THIS PROCEDURE.
DDM-2000 OC-3 M
Issue 2, February 2000
ULTIPLEXER
363-206-285