363-206-285
Issue 2, February 2000
16.
NOTE:
If PC hard drive is being used, ensure you are in the correct directory. If
floppies are being used, ensure the first (number 1) diskette is installed in
floppy drive.
Enter the shelf number for the shelf being downloaded to for new program
download.
Response:
17.
NOTE:
After the system prompt (<), the system will respond normally to
commands entered. The "Commands and Reports" section of Volume 1
of this manual gives a description of the commands.
Use rtrv-ne command to retrieve the name (tid) of the shelf having new
program installed or see TID in response above. .
PC responds with:
/*************************************
*
*
Lucent Technologies
*
DDM-2000 OC-3 Multiplexer
*
*
Release a.b.c
*
*************************************/
TID date time
M
rtrv-alm:all COMPLD
/* Active Alarms and Status Report
<
DDM-2000 OC-3 M
Detailed Level Procedure:
.
.
.
ULTIPLEXER
DLP-525
Page 6 of 10
*
*
*
*
*
*