Lucent DDM-2000 OC-3 User And Service Manual page 361

363-206-285
Issue 2, February 2000
DO ITEMS BELOW IN ORDER LISTED . . . . .FOR DETAILS, GO TO
26. At Node 1, remove optical splitter from MAIN 2(P) IN. Connect
optical fiber from Node 2 MAIN 1 OUT to Node 1 MAIN 2(P) IN.
(See Figure 16.)
27.
NOTE:
Wait until FAULT LED on MAIN OLIU extinguishes before
attempting switch.
At Node 2, use the switch-line:main:pri=manual
command to switch service to the protection line (main-2 OLIU
active) at Node 2. (See Figure 16.)
Figure 16 – DDM-2000 OC-3 Drop or Add/Drop Network to Ring Upgrade
DDM-2000 OC-3 M
Circuit Order:
ULTIPLEXER
NTP-039
Page 21 of 32