Lucent DDM-2000 OC-3 User And Service Manual page 356

NTP-039
: Circuit Order
Page 16 of 32
DO ITEMS BELOW IN ORDER LISTED. . . . . FOR DETAILS, GO TO
21.
NOTE:
Wait until FAULT LED on MAIN OLIU extinguishes before
attempting switch.
At Node 1 only, use the switch-line:main:pri=manual
command to switch service to the service line (main-1 OLIU
active at Node 1). (See Figure 11.)
Figure 11 – DDM-2000 OC-3 Drop or Add/Drop Network to Ring Upgrade
DDM-2000 OC-3 M
Issue 2, February 2000
ULTIPLEXER
363-206-285