Lucent DDM-2000 OC-3 User And Service Manual page 843

DLP-514
: Detailed Level Procedure
Page 3 of 18
Table B – Multimode Lightguide Jumpers
Code
FL1E-E-2
FL1-EP-EP-04
FL1-EP-EP-10
FL1-EP-EP-25
FL1-EP-EP-50
FL1-EP-EP-100
FL1E-A-2
FL1E-A-10
FL1E-A-25
FL1E-A-50
FL1E-A-100
LL1SC-SC-2
LL1SC-SC-10
LL1SC-SC-25
LL1SC-SC-50
LL1SC-SC-100
LL1FC-FC-10
LL1FC-FC-25
LL1FC-FC-50
LL1FC-FC-100
3. Establish communication with technician at other end of the optical span.
4. NOTE:
The optical connector labeled OUT is the output from the OLIU. The
optical connector labeled IN is the input to the OLIU.
NOTE:
For DDM-2000 22F/22F-U/22F2-U OLIUs, the recommended optical fiber
is single mode, but multimode can be used. DDM-2000
22G-U/22G2-U/22G3-U/22G4-U OLIUs require single-mode optical
fibers. DDM-2000 24G-U/24H-U/29G-U/29H-U OLIU and FT-2000
T939A OC12 Optical Interface require single-mode optical fibers.
DDM-2000 22D-U OLIUs and FT-2000 LAA5 IS3 Optical Interface
require multimode optical fibers. For the FT-2000 LAA10 OC3 Optical
Interface the recommended optical fiber is single mode, but multimode
can be used. For the DDM-2000 FiberReach 26G2-U OLIUs the
recommended optical fiber is single mode, but multimode can be used.
The DDM-2000 27G-U/27G2-U OLIUs require single-mode optical fiber.
Comcode Length (Feet)
105351795 2
107150161 4
107150195 10
107150229 25
107150260 50
107150286 100
105613954 2
105613988 10
105614010 25
105614051 50
105614119 100
106908668 2
106908692 10
106908734 25
106908775 50
10690879 100
107095549 10
107095556 25
107095564 50
107095572 100
DDM-2000 OC-3 M
Issue 2, February 2000
Connectors
®
ST -ST
ST - ST
ST - ST
ST - ST
ST - ST
ST - ST
ST -2016A Biconic
ST -2016A Biconic
ST -2016A Biconic
ST -2016A Biconic
ST -2016A Biconic
SC-SC
SC-SC
SC-SC
SC-SC
SC-SC
FC-FC
FC-FC
FC-FC
FC-FC
ULTIPLEXER
363-206-285