Lucent DDM-2000 OC-3 User And Service Manual page 971

DLP-533
: Detailed Level Procedure
Page 3 of 6
Rebooting the PC
Occasionally, you may have to reboot the PC. There are three ways to accomplish
this:
• Power ON/OFF switch — If the PC is OFF, you should set the ON/OFF switch to
the ON position. If the PC is already ON, it is preferable to reset it using one of
the following two methods:
• RESET button — Not all PCs have a RESET button, but if yours does, it provides
an easy way to reset the PC. Alternatively, the following method may work.
• Hold down the Ctrl, Alt and Delete keys all at the same time.
If RESET or Ctrl, Alt, and Delete keys are not effective, turn OFF the PC, wait a few
seconds, and turn it back ON. Rebooting the PC clears all data you had in memory. If
the time of day clock is not indicating the current time and date, set the time of day
clock.
DDM-2000 OC-3 M
Issue 2, February 2000
ULTIPLEXER
363-206-285