Table of Contents
Advertisement
NTP-016
: System Turnup
Page 8 of 10
DO ITEMS BELOW IN ORDER LISTED. . . . . FOR DETAILS, GO TO
24.
NOTE:
A craft interface terminal (CIT) is required to access optional
features of the DDM-2000 OC-3 Multiplexer, such as system
name (tid); site, and shelf number; security and logins; date
and time; far end communications (fecom); etc.
NOTE:
Alarm activity will result when optical fiber loops are removed
for end-to-end system testing.
Activate optional features as required from work order or office
records.
25.
NOTE:
The procedures referenced in this step are used to establish
basic configurations. For other configurations requiring
connections with other systems (FT-2000, OC-12, etc.) or
networks, refer to the System Turnup/Circuit Order:
IXL-001 for procedures on how to connect OC-3/IS-3/EC-1
spans (for example, establishing dual ring interworking,
adding new spans or shelves, etc.).
After all shelves in the network have been tested, you can
establish the end-to-end DDM-2000 OC-3 subnetwork.
A.
DDM-2000 Path Switched Rings
B.
OC-3/IS-3 Dual Ring Interworking — DDM-2000 OC-3 to
OC-12 or FT-2000 Ring
C. EC-1 Dual Ring Interworking — DDM-2000 OC-3 to OC-12 or
FT-2000 Ring
D. DDM-2000 OC-3 Single-Homed OC-3 Access via Release 7
DDM-2000 OC-12 Backbone Ring
E.
DDM-2000 OC-3 Single-Homed OC-3 Access via Release 15
OC-12 Backbone Ring
F.
DDM-2000 OC-3 Dual-Homed OC-3 Access via Release 7
DDM-2000 OC-12 Backbone Ring
G.
DDM-2000 OC-3 Dual-Homed OC-3 Access via Release 15
DDM-2000 OC-12 Backbone Ring
H. Single-Homed FiberReach Access via DDM-2000 OC-3 or
OC-12 Backbone Ring
I.
Dual-Homed FiberReach Access via DDM-2000 OC-3 or
OC-12 Backbone Ring
DDM-2000 OC-3 M
Issue 2, February 2000
ULTIPLEXER
363-206-285
DLP-512
NTP-022
NTP-041
NTP-013
NTP-040
NTP-053
NTP-050
NTP-054
NTP-043
NTP-044
Hide quick links:
Advertisement
Table of Contents
