Lucent DDM-2000 OC-3 User And Service Manual page 286

NTP-029
: Circuit Order
Page 18 of 22
DO ITEMS BELOW IN ORDER LISTED. . . . . FOR DETAILS, GO TO
24.
NOTE:
Wait until FAULT LED on MAIN OLIU extinguishes before
attempting switch.
At Node 1, use the switch-line:main:pri=manual
command to switch service to the service line (main-1 OLIU
active-rx) at Node 1. (See Figure 14.)
Figure 14 – DDM-2000 OC-3 Point-to-Point to Ring Upgrade
DDM-2000 OC-3 M
Issue 2, February 2000
ULTIPLEXER
363-206-285