Lucent DDM-2000 OC-3 User And Service Manual page 275

363-206-285
Issue 2, February 2000
DO ITEMS BELOW IN ORDER LISTED . . . . .FOR DETAILS, GO TO
13.
NOTE:
Wait until FAULT LED on MAIN OLIU extinguishes before
attempting switch.
At Node 2 only, use the switch-line:main:pri=manual
command to switch to the service (MAIN 1) line (main-1 OLIU
active-rx). (See Figure 3.)
Figure 3 – DDM-2000 OC-3 Point-to-Point to Ring Upgrade
DDM-2000 OC-3 M
Circuit Order:
ULTIPLEXER
NTP-029
Page 7 of 22