363-206-285
Issue 2, February 2000
DO ITEMS BELOW IN ORDER LISTED . . . . .FOR DETAILS, GO TO
49. Repeat this procedure from Step 38 for all remaining nodes to be
converted. Figure 22 shows the completed ring configuration.
Figure 22 – DDM-2000 OC-3 Drop or Add/Drop Network to Ring Upgrade
50. Use set-fecom:dcc-all:com=enabled command at all
nodes to enable far-end communications (fecom).
51. What Release of software is installed in the system?
If Release 15 software is installed, continue with Step 52.
If Release 13 software is installed, proceed to Step 53.
DDM-2000 OC-3 M
Circuit Order:
ULTIPLEXER
NTP-039
Page 29 of 32