Lucent DDM-2000 OC-3 User And Service Manual page 911

DLP-523
: Detailed Level Procedure
Page 29 of 30
56. Remove old IMA LAN and install replacement IMA LAN in required slot of
LOW SPEED group.
57. Connect cable to RJ-45 connector on BBF9 IMA LAN or optical cable to
optical connector on BBF10 IMA LAN.
Response:
58. STOP. YOU HAVE COMPLETED THIS PROCEDURE.
FAULT LED on IMA LAN circuit pack lights and may
remain lighted for about 40 seconds and then goes off.
DDM-2000 OC-3 M
Issue 2, February 2000
ULTIPLEXER
363-206-285