Lucent DDM-2000 OC-3 User And Service Manual page 821

363-206-285
Issue 2, February 2000
1.
NOTE:
When a replacement circuit pack (except the SYSCTL) is configured the
same as the original circuit pack, it may be inserted with no further action.
When a replacement circuit pack is different (different code or different
switch options) from the original, the SYSCTL UPD/INIT button must be
momentarily depressed (or use the upd command) to update the
inventory.
Find the circuit pack in Table A and go to the indicated step. If you were sent
here from another procedure, return to that procedure after setting options.
Table A – Circuit Packs
Circuit Pack
BBG8/BBG8B SYSCTL
BBG9 OHCTL*
BBF2 TGS
BBF2B/BBF2C TGS
BBF4 TG3
BBF5 JMPR*
22D-U OLIU*
22F/22F-U/22F2-U OLIU*
22G-U/22G2-U/22G3-U/22G4-U OLIU*
26G2-U/27G-U/27G2-U OLIU*
24G-U/24H-U OLIU*
29G-U/29H-U OLIU*
BBG2/BBG2B MXRVO*
BBG4/BBG4B/BBG19 DS3
BBG20 TMUX
BBF1/BBF1B DS1
BBF3/BBF3B DS1PM
BBG6 STS1E
BBF8 HDSL
BBF6 T1EXT
BBF9/BBF10 LAN
177A Retainer Card*
*There are no option switches on these circuit packs.
Set Circuit Pack Options
DDM-2000 OC-3 M
Detailed Level Procedure:
Step
Step 2
—
Step 7
Step 11
Step 11
—
—
—
—
—
—
—
—
Step 16
Step 16
Step 19
Step 19
Step 23
Step 28
Step 31
Step 34
—
ULTIPLEXER
DLP-513
Page 1 of 20