Lucent DDM-2000 OC-3 User And Service Manual page 977

363-206-285
Issue 2, February 2000
Next, insert the blank diskette into the drive and close the door. Depress any key on
the keyboard to begin formatting. After you depress a key, a message similar to the
following will appear:
You will see the disk drive indicator light come on. The formatting process takes
several minutes. When the formatting is complete, a message appears to tell you that
the format is complete. In addition, you will see several lines of messages about total
disk space available. Finally, you will be prompted to format another disk with the
following message:
If you do not need to format another disk, type n and <Enter>. The system will
respond with a prompt A> display.
Remove the diskette from the disk drive and place it in a protective envelope or
storage location. If you have not already done so, label the diskette(s) as DDM-2000
OC-3 Release a.b.c - working copy. You are now ready to copy the files from the
original diskette(s) to the working copy diskette(s).
Formatting...
Format another (Y/N)?
DDM-2000 OC-3 M
Detailed Level Procedure:
ULTIPLEXER
DLP-534
Page 3 of 8