Lucent DDM-2000 OC-3 User And Service Manual page 399

NTP-042
: Circuit Order
Page 9 of 12
DO ITEMS BELOW IN ORDER LISTED. . . . . FOR DETAILS, GO TO
32. At FT-2000 primary node, use the
FAULT-Switch-Path-STS3-Line-Reset command to switch
the designated tributary from secondary node to primary node.
(Switch traffic to primary node.)
33. Remove all EC-1/DS3 connections between the nodes with BBG6
STS1E/LAA4 STS1E circuit packs removed, if required.
34. The upgrade is now complete.
DDM-2000 OC-3 M
Issue 2, February 2000
ULTIPLEXER
363-206-285