Lucent DDM-2000 OC-3 User And Service Manual page 27

363-206-285
Issue 3, June 2001
Table A – Numerical List of TOP Procedures (Note)
System Turnup/Circuit Order Tab (Contd)
NTP-020 Establish Initial End-to-End DS3-to-DS1 Service
(TMUX Group Equipped But Not In Service)
NTP-021 Add New TMUX Group for DS3 Service (System In Service)
NTP-022 Establish End-to-End DDM-2000 OC-3 or OC-12 System
OC-3 or OC-12 Optical Fiber Spans (Path Switched Ring Network)
NTP-023 Upgrade DDM-2000 OC-3 Ring Network to OC-12 Ring Network
Using OC-3 Shelves (In Service)
NTP-024 Upgrade DDM-2000 OC-3 Ring Network to OC-12 Ring Network
Using OC-3/OC-12 Shelves (In Service)
NTP-025 Upgrade DDM-2000 OC-12 Ring by Removing OC-12 Shelf and
Replacing with Existing Single-Homed OC-3 Shelf (In Service)
NTP-026 Add New DDM-2000 OC-3 or OC-12 Node (Shelf) To DDM-2000
OC-3 or OC-12 Path Switched Ring
NTP-027 Discontinue DDM-2000 OC-3 or OC-12 Node (Shelf)
From DDM-2000 OC-3 or OC-12 Path Switched Ring Network
NTP-028 Establish Initial End-to-End LAN Service
(Group Equipped But Not In Service)
NTP-029 Upgrade DDM-2000 OC-3 Point-to-Point to Path Switched Ring
(In Service)
NTP-030 Upgrade DDM-2000 OC-3 Point-to-Point to Path Switched Ring
(Out of Service)
NTP-031 Add New LAN Service (Group Already In Service)
NTP-032 Discontinue End-to-End LAN Service
NTP-033 Establish Initial End-to-End T1 Service
(Group Equipped But Not In Service)
NTP-034 Establish Initial Low Speed EC-1 Interface
(Group Equipped But Not In Service)
NTP-035 Add New STS1E Low Speed Group for EC-1 Interface
System In Service
NTP-036 Discontinue EC-1 Interface
NTP-037 Add New T1 Service (Group Already In Service)
NTP-038 Convert DS1 Group Service to EC-1 Group Service
NTP-039 Upgrade DDM-2000 OC-3 Add/Drop Network to Path Switched Ring
NTP-040 Establish Single-Homed OC-3 Access via
DDM-2000 OC-12 Backbone Ring
Operation and Maintenance:
DDM-2000 OC-3 M
*
(Contd)
ULTIPLEXER
IXL-001
Page 11 of 18