Lucent DDM-2000 OC-3 User And Service Manual page 944

DLP-528
: Detailed Level Procedure
Page 8 of 12
shelf. If CIT bay mult cabling is connected to this shelf verify that it is
terminated.
Exit TERM (Alt-F2) and repeat this procedure from Step 23.
28. Enter the shelf number for the local shelf being used for new program
download.
Response:
29. NOTE:
After the system prompt (<), the system will respond normally to
commands entered. The Commands and Reports section of this manual
gives a description of the commands.
Use rtrv-map-network command to retrieve the name (tid) of the remote
shelf having new program installed.
PC responds with:
login<
password<
/*************************************
*
*
* Lucent Technologies
* DDM-2000 OC-3 Multiplexer
*
* Release a.b.c
*
*************************************/
TID date time
M rtrv-alm:all COMPLD
/* Active Alarms and Status Report
<
DDM-2000 OC-3 M
Issue 2, February 2000
.
.
.
ULTIPLEXER
363-206-285
*
*
*
*
*
*
*