DLP-525
: Detailed Level Procedure
Page 9 of 10
27. Execute the apply command at the shelf to receive the software. Software
download may take up to 2 minutes.
Response:
28. Did apply command successfully complete?
If YES, then STOP. YOU HAVE COMPLETED THIS PROCEDURE.
If NO, then call your local RTAC or CTS.
The addressed IMA LAN resets after the software is
installed.
The IMA LAN FAULT LED goes on for the duration of the
reset and goes off after the reset.
DDM-2000 OC-3 M
Issue 2, February 2000
ULTIPLEXER
363-206-285