Lucent DDM-2000 OC-3 User And Service Manual page 360

NTP-039
: Circuit Order
Page 20 of 32
DO ITEMS BELOW IN ORDER LISTED. . . . . FOR DETAILS, GO TO
25.
NOTE:
Wait until FAULT LED on MAIN OLIU extinguishes before
attempting switch.
At Node 1, use the switch-line:main:pri=manual
command to switch service to the service line (main-1 OLIU
active) at Node 1. (See Figure 15.)
Figure 15 – DDM-2000 OC-3 Drop or Add/Drop Network to Ring Upgrade
DDM-2000 OC-3 M
Issue 2, February 2000
ULTIPLEXER
363-206-285