Lucent DDM-2000 OC-3 User And Service Manual page 351

363-206-285
Issue 2, February 2000
DO ITEMS BELOW IN ORDER LISTED . . . . .FOR DETAILS, GO TO
16.
NOTE:
Wait until FAULT LED on MAIN OLIU extinguishes before
attempting switch.
At Node 2 only, use the switch-line:main:pri=manual
command to switch service to the protection line (main-2 OLIU
active at Node 2). (See Figure 6.)
Figure 6 – DDM-2000 OC-3 Drop or Add/Drop Network to Ring Upgrade
DDM-2000 OC-3 M
Circuit Order:
ULTIPLEXER
NTP-039
Page 11 of 32