Lucent DDM-2000 OC-3 User And Service Manual page 528

363-206-285
Issue 2, February 2000
DO ITEMS BELOW IN ORDER LISTED . . . . .FOR DETAILS, GO TO
20.
NOTE:
Establishing service requires that the proper slots in each
terminating node be properly equipped with the correct
circuit pack(s) for the type of service being established. It
also requires numerous cross connections in each of the
nodes representing the path of the required service.
Additionally, transmission tests should be performed to verify
the continuity and quality of the established circuit.
The OC-3 linear extension is now ready for initial service to be
established. For DS1, DS3, EC-1, STS-3c, T1, HDSL, and/or LAN
terminations on a DDM-2000 OC-3 shelf, use the procedures in
this 363-206-285, DDM-2000 OC-3 Multiplexer, TARP Release 13
and Later, User/Service Manual (TOP)—Volume II to establish
those services.
DDM-2000 OC-3 M
System Turnup:
ULTIPLEXER
NTP-055
Page 8 of 10