Lucent DDM-2000 OC-3 User And Service Manual page 32

IXL-001
: Operation and Maintenance
Page 16 of 18
Table A – Numerical List of TOP Procedures (Note)
Detailed Level Procedures (DLP) Tab (Contd)
DLP-559 Make Cross-Connections Using CIT Single/Dual Homing and OC-3
or OC-12 Extensions OC-48/OC-3 or OC-48/OC-12 Configurations
DLP-560 Make Cross-Connections Using CIT
Single/Dual Homing OC-12/OC-3 Ring Configuration
DLP-561 Install Software Generic Program
Network Element Software New Shelf Installation
Only BBG8/BBG8B SYSCTL and BBG9 OHCTL Installed
DLP-562 Install New Software Generic Program
Network Element Software
Remote Shelf Download In-Service System
DLP-563 Provision STS-1 Path Trace
DLP-564 Install BBF8 HDSL Circuit Packs
DLP-565 Sync Messaging - Change Kbyte to Sbyte
DLP-566 Obtain Equipment, Check Software, Prepare and Connect PC for
Software Download
* Table A is provided as a reference only, and should not be used alone in finding instructions for
performing tasks.
DDM-2000 OC-3 M
Issue 3, June 2001
*
(Contd)
ULTIPLEXER
363-206-285