Lucent DDM-2000 OC-3 User And Service Manual page 467

363-206-285
Issue 2, February 2000
DO ITEMS BELOW IN ORDER LISTED . . . . .FOR DETAILS, GO TO
18.
NOTE:
Establishing service requires that the proper slots in each
terminating node be properly equipped with the correct
circuit pack(s) for the type of service being established. It
also requires numerous cross connections in each of the
nodes representing the path of the required service.
Additionally, transmission tests should be performed to verify
the continuity and quality of the established circuit.
The network is ready for service to be established. For service
terminations on a FT-2000 shelf, use the procedures in
365-575-103, FT-2000 OC-48 Lightwave System, Release 8.1
Through 9.1, User/Service Manual , to establish those services.
For DS1, DS3, EC-1, HDSL, T1, STS3c, and/or LAN terminations
on a DDM-2000 OC-3 shelf, use the procedures in this
User/Service manual to establish those services.
DDM-2000 OC-3 M
Circuit Order:
ULTIPLEXER
NTP-049
Page 7 of 10