Subaru XT 1988 Service Manual page 387

2-8
FUEL SYSTEM
2) In engine compartment, detach fuel delivery hoses, return
hoses, evaporation tubes and canister.
Evaporation hose (vacuum line)
Evaporation hose (main purge line)
Delivery hose
Return hose
. . Pressure regulator
.~-
v-:_-+
Fuel)!!iector _---./ _ _ _ _ _ _ _ Evaporation hose (to fuel tank)
:O~:::::=~----.-._j -"
Evaporation hose
Fig. 21
INSTALLATION
Install in the reverse order of removal.
1) Connect delivery hose to delivery pipe with an overlap
of 25 to 30 mm (0.98 to 1.18 in).
2) Connect delivery hoses and fuel return hose to fuel tank,
fuel pump and fuel filter until they reach the base of each
pipe.
12
L2·1242
3) Insert evaporation tube into evaporation pipe by approx.
15 mm (0.59 in) and position a clip with approx. 8 mm (0.31
in) from hose end.
4) When installing 2·way valve, install it with its "TO
ENGINE" mark facing downward.
5) Be sure to inspect hoses and their connections for any
leakage of fuel.
'(
.
I