Subaru XT 1988 Service Manual page 231

ENGINE
2-3
,
Fig. 154
Timing
mark
L2·1319
(31
Temporarily tighten bolts
®
and
@
while moving
the right tensioner down in the direction of the arrow.
Loosen bolt
®
180°.
L2-1320
Fig. 155
(4) I nstall crankshaft sprocket to crankshaft.
L2-1321
Fig. 156
75
(5) I nstall timing belt from the crankshaft side. Be care-
ful not to loosen it.
(6) Loosen tensioner
R
H tightening bolt
@
by 1/2 turn
to apply tension to belt.
(7) Apply the specified torque to camshaft sprocket R H
in counterclockwise direction using BELT TENSION
WRENCH (499437100). While applying torque, tighten
tensioner
R
H tightening bolt
@
temporarily, then tighten
bolt
®
temporarily.
Fig. 157
.).
When torquing sprocket, be extremely careful not to apply
excessive force to it. Excessive belt tension will greatly reduce
belt life.
Belt tension
Torque to cam sprocket
147 -245N 24 - 25 N·m
(15 - 25 kg, 33 - 551b) (2.4 - 2.6 kg-m, 17 - 19 ft-Ib)
(8) Tighten bolt
@
and bolt
®,
in that order, to the
specified torque.
Tightening torque:
23 - 26 N·m (2.3 - 2.7 kg-m, 17 - 20 ft-Ib)
Make sure that flywheel timing mark and camshaft sprocket
RH timing mark are in their normal positions.