Auth. Device Setting: Setting The Authentication Device; General Settings: Specifying The Ic Card To Be Used With The Authentication Device - Konica Minolta Bizhub Pro 1100 Additional Information
Hide thumbs
Also See for Bizhub Pro 1100:
- Quick manual (119 pages) ,
- Maintenance manual (71 pages) ,
- Additional information (58 pages)
Table of Contents
Advertisement
7.2
Auth. Device Setting: Setting the Authentication Device
7.2
Auth. Device Setting: Setting the Authentication Device
<Errata>
User's guide / Correction po-
sition
<HTML User's Guide>
[Settings and Adjustments] )
[Utility/Counter] ) [Administra-
tor Setting] ) [User Auth./Ac-
count Track: Setting the User
Authentication/Account Track
Function] ) [Auth. Device Set-
ting: Setting the Authentication
Device] ) [Authentication Meth-
od: Specifying the IC Card to Be
Used with the Authentication
Device]
7.2.1
General Settings: Specifying the IC card to be used with the authentication
device
To use the Authentication Unit AU-201/Authentication Unit AU-201S, you must first specify the IC card to
be used and set the operation for authentication in advance.
1
Operate Administrator Setting to display the [Administrator Setting Menu] screen.
For details about how to display the [Administrator Setting Menu] screen, refer to [Settings and Adjust-
ments] ) [Utility/Counter] ) [Administrator Setting] ) [Displaying the Administrator Setting Menu
Screen] in the HTML User's Guide.
2
Press [User Auth./Account Track] ) [Authentication Device Settings] ) [General Settings] in sequence
on the [Administrator Setting Menu] screen.
The [General Settings] screen is displayed.
bizhub PRO 1100
Description
Correction of operation with the operation screen added
* For details, refer to the following.
7
7-3
Advertisement
Table of Contents
