Halftone Pattern; Lattice Pattern - Konica Minolta bizhub C353P Service Manual

16. Jig Software
16.14.3

Halftone Pattern

Functions • To produce a solid halftone pattern.
Use • Used for checking uneven density and pitch noise.
Pattern
Setting/ • # of Print ("1" to 999)
Procedure • Select "SINGLE" (single print) or MULTI (multi print).
• Select FEET or "HYPER."
• Select "Gradation" or Resolution if HYPER has been selected.
• Select the color mode.
"Cyan", Magenta, Yellow, Black (4PC), Red, Green, Blue, CMYK, 3 Color,
4 Color, Black (1PC), MIX
• Type the density level (0 to "255").
16.14.4

Lattice Pattern

Functions • To produce a lattice pattern.
Use • Used for checking fine line reproducibility and uneven density.
• A reverse pattern is also used to check for fine line reproducibility of white letters on a
solid background.
Pattern
Setting/ • # of Print ("1" to 999)
Procedure • Select "SINGLE" (single print) or MULTI (multi print).
• Select "FEET" or HYPER.
• Select Gradation or Resolution. (Only select HYPER)
• Select the color mode.
"Cyan", Magenta, Yellow, Black (4PC), Red, Green, Blue, CMYK, 3 Color,
4 Color, Black (1PC)
• Enter CD width and FD width (0 to 191 dots).
• Type the density level (0 to "255").
• Select "Normal" or Reverse.
370
Field Service Ver. 1.0 Oct. 2007
SINGLE
HYPER
Gradation
Cyan
Density: 255
A02EF3C519DA
SINGLE
FEET
Cyan
CD Width: 5
FD Width: 5
Density: 255
Normal
A02EF3C511DA