Omron FQ2-S/CH Series User Manual page 450


Save All Model Dictionary Data
Saves all model dictionary data as a file to the SD card inserted in the Touch Finder.
The destination for all model dictionary data is the following fixed directory on the SD card.
\Sensor name\DGP
Format
MRC SRC
(1 byte) (1 byte)
28 0F
Response Format
MRC SRC
(1 byte) (1 byte)
28 0F
End Codes
End code (hex)
0000
FFFF
Parameter Descriptions
All model dictionary data
file name
Important
• If the specified file name already exists, this existing file will be overwritten.
• Do not turn off power to the Sensor until there is a response.
448
Command Control
Sensor command code (4
bytes)
0070D000
MRES SRES
(1 byte) (1 byte)
End code
Description
Command execution ended normally.
Command execution ended in an error.
Specifies the all model dictionary data file name to be saved.
The file name extension (.dgp) can be omitted.
All model dictionary data file
name (4 to 64 bytes)
64 characters max.
Sensor command code (4 bytes)
0070D000
FQ2-S/CH User's Manual
for Communications Settings