Omron FQ2-S/CH Series User Manual page 323

TOTALDATA or TD
Acquire Statistical Data
Acquires the statistical data (such as the number of measurements, number of NG overall judgments, and
other information, since the power supply was turned ON) possessed by the Sensor.
The following types of statistical data are available. Specify the data to be read from these types with this
command.
• Number of measurements since the power supply was turned ON
• Number of OK overall judgments
• NG rate
• Number of NG judgments since the power supply was turned ON
• OK rate
<Command Format>
Command
T O T A L D
Space
or
(0x20)
T D CR
Delimiter
Command
Type of statistical data to be acquired
(1 digit max.)
<Response Format>
When the Command Is Processed Normally
Acquired
CR
value
O K CR
Delimiter
When the Command Is Not Processed Normally
E R CR
Delimiter
<Parameter Descriptions>
Type of statistical data to
be acquired
Acquired value
FQ2-S/CH User's Manual
for Communications Settings
Type of statistical data
to be acquired
(1 digit max.)
A T A
Space
(0x20)
Specifies the type of statistical data to be acquired.
1: Number of measurements
2: Number of NG judgments
3: NG rate
4: Number of OK judgments
5: OK rate
Returns the value of the acquired statistical data.
CR
Delimiter
321
Command Control