Omron FQ2-S/CH Series User Manual page 352

SGRLOAD
This command loads all scene data that is stored on the SD card inserted in the Touch Finder.
The source for all scene data is the following fixed directory on the SD card.
\Sensor name\SGP
<Command format>
S G R L O A D
Space (0x20)
<Response format>
When Processing Is Performed Normally
When Processing Is Not Performed Normally
<Parameter Descriptions>
All scene data file name
Important
Do not turn off power to the Sensor until there is a response.
350
Command Control
C
R
All scene data file name
Specifies the all scene data file name to be loaded. (64 characters max.)
The file name extension (.sgp) can be omitted.
Only files that have an "SGP" extension can be read.
FQ2-S/CH User's Manual
for Communications Settings