Omron FQ2-S/CH Series User Manual page 329

DOPORTCOND or DPC
Batch Set D Terminal Statuses
Batch sets the ON/OFF status for the D terminals (D0 to D15).
Important
Before executing this command, change the FQ2 execution mode to stop mode with the Set Execution Mode com-
mand.
Set Execution Mode: p.341
<Command Format>
Command
D O P O R T
Space
or
(0x20)
D P C
Command Terminal status
(5 digits max.)
<Response Format>
When the Command Is Processed Normally
O K CR
Delimiter
When the Command Is Not Processed Normally
E R CR
Delimiter
FQ2-S/CH User's Manual
for Communications Settings
Space
(0x20)
C O N D
Delimiter
CR
Terminal status
(5 digits max.)
Delimiter
CR
327
Command Control