Omron FQ2-S/CH Series User Manual page 266

Load All Calibration Data
This command loads all calibration data that is stored on the SD card inserted in the Touch Finder.
The source for all calibration data is the following fixed directory on the SD card.
\Sensor name\CGP
The file name is not case sensitive. The file name extension can be omitted.
Command (PLC to Sensor)
First word of com-
mand area
+2
+3
+4
+5
+6
:
+35
*1 Loads the files named CalibrationGroup_***.cgp saved on the SD card. (***: Specified file number)
Response (Sensor to PLC)
First word of
response area
+2
+3
+4
+5
264
Command Control
Bits
12 to 15 8 to 11 4 to 7
1011 0000 0000
0000 0000 0110
0000 0000 0000
0000 0000 0000
0000 0000 0000
: :
0000 0000 0000
Bits
12 to 15 8 to 11 4 to 7
1011 0000 0000
0000 0000 0110
0000 0000 0000
0000 0000 0000
0 to 3
0000
Command code
0000
0000 • EtherNet/IP, PROF-
INET
0000
File number to load (0
*1
to 999)
0000
: :
0000
0 to 3
0000 Command code
The command code for which the response
0000
applies is stored.
0000 Response code
Command execution result
0000
0: OK, FFFFFFFF: NG
Description
• PLC link
File name to load
64 characters max.
The file name exten-
sion (.cgp) can be
---
omitted.
Refer to
Specifying Character
Strings: p. 206
Description
FQ2-S/CH User's Manual
for Communications Settings