Omron FQ2-S/CH Series User Manual page 440


Load All Model Dictionary Data
This command loads all model dictionary data that is stored on the SD card inserted in the Touch Finder.
The source for all model dictionary data is the following fixed directory on the SD card.
\Sensor name\DGP
Format
MRC SRC
(1 byte) (1 byte)
28 0F
Response Format
MRC SRC
(1 byte) (1 byte)
28 0F
End Codes
End code (hex)
0000
FFFF
Parameter Descriptions
All model dictionary data
file name
Important
Do not turn off power to the Sensor until there is a response.
438
Command Control
Sensor command code (4
bytes)
0060D000
MRES SRES
(1 byte) (1 byte)
End code
Command execution ended normally.
Command execution ended in an error.
Specifies the all model dictionary data file name to be saved.
The file name extension (.dgp) can be omitted.
All model dictionary data file
name (4 to 64 bytes)
64 characters max.
Sensor command code (4 bytes)
0060D000
Description
FQ2-S/CH User's Manual
for Communications Settings