Omron FQ2-S/CH Series User Manual page 347

PARAPORTCOND or PPC
Set Terminal Status
This command sets the output signal ON/OFF status for the specified parallel I/O terminal.
<Command Format>
Command
P A R A P O
Space
or
(0x20)
P P C
Command Terminal type
(2 digits max.)
<Response Format>
When the Command Is Processed Normally
O K CR
Delimiter
When the Command Is Not Processed Normally
E R CR
Delimiter
FQ2-S/CH User's Manual
for Communications Settings
R T C O N
Delimiter
CR
Terminal number Terminal status
(2 digits max.) (1 digit max.)
Space Space
(0x20) (0x20)
Terminal type Terminal number
(2 digits max.) (2 digits max.)
D
Space Space
(0x20) (0x20)
Terminal status
(1 digit max.)
CR
Delimiter
Space
(0x20)
Command Control
345