Omron FQ2-S/CH Series User Manual page 200

Type of command
Commands to set status
Load setting data com-
mands
Save setting data com-
mands
198
Controlling Operation and Outputting Data with FINS/TCP No-protocol Commands
Command codes (hex)
MRC+SRC com- Sensor command
mand code code
280F 00307010
280F 00307020
280F 00308010
280F 00308020
280F 00308030
280F 0030F000
280F 00501010
280F 00501020
280F 00501040
280F 00504010
280F 00504060
280F 00601000
280F 00602000
280F 00603000
280F 00605000
280F 0060A000
280F 0060B000
280F 0060C000
280F 0060D000
280F 00701000
280F 00702000
280F 00703000
280F 00704000
Function
Sets the input status (allowed/prohibited) of the
communications port for the specified commu-
nications protocol.
Sets the output status (allowed/prohibited) for
the specified communications protocol.
Sets the output signal ON/OFF status for the
specified parallel I/O terminal.
Batch sets the ON/OFF status for the all parallel
I/O output terminals other than the D terminals
(D0 to D15).
Batch sets the ON/OFF status for the D termi-
nals (D0 to D15).
Sets the FQ2 execution status (execution
mode).
Sets parameters for a position compensation
item or filter item.
Sets parameters for the specified inspection
item.
Sets the value for the specified camera param-
eter.
Sets the value to the specified system data.
Sets the value of the terminal offset data that is
added to the IN0 to IN4 command parameters
Loads scene data that is stored on the SD card
inserted in the Touch Finder.
Loads all scene data that is stored on the SD
card inserted in the Touch Finder.
Loads system data that is stored on the SD
card inserted in the Touch Finder.
Loads all setting data (all scene data, system
data, calibration group data) for the Sensor
saved as a backup file from the SD card
inserted in the Touch Finder.
Loads calibration data that is stored on the SD
card inserted in the Touch Finder as the calibra-
tion data with the specified number.
Loads all calibration data that is stored on the
SD card inserted in the Touch Finder.
Loads model dictionary data that is stored on
the SD card inserted in the Touch Finder as the
model dictionary with the specified number.
Loads all model dictionary data that is stored on
the SD card inserted in the Touch Finder.
Saves scene data to the SD card inserted in the
Touch Finder as a file.
Saves all scene data as a file to the SD card
inserted in the Touch Finder.
Saves system data as a file to the SD card
inserted in the Touch Finder.
Saves image data saved in the Sensor's mem-
ory by the logging function to the SD card
inserted in the Touch Finder as ifz data.
for Communications Settings
Reference
p.411
p.412
p.413
p.415
p.416
p.417
p.426
p.427
p.428
p.429
p.430
p.431
p.432
p.433
p.434
p.435
p.436
p.437
p.438
p.439
p.440
p.441
p.442
FQ2-S/CH User's Manual