Omron FQ2-S/CH Series User Manual page 425


Acquire Terminal Offset Data
This command acquires the terminal offset data that is added to the IN0 to IN4 command parameters when
executing parallel commands
If no value has been set with the Set Terminal Offset command, "00000" is returned as the terminal offset value
and "0000" (ended normally) is returned for the end code.
Set Terminal Offset Data: 280F 00504060 p. 430
Command Format
MRC SRC Sensor command code (4
(1 byte) (1 byte) bytes)
28 0F 00404060
Response Format
MRC SRC MRES
(1 byte) (1 byte) (1 byte)
28 0F End code
End Codes
End code (hex)
0000 Command execution ended normally.
FFFF Command execution ended in an error.
Parameter Descriptions
Terminal offset value Returns the value added to the IN0 to IN4 command parameters when executing parallel commands.
FQ2-S/CH User's Manual
for Communications Settings
SRES Sensor command code (4 bytes) Terminal offset
(1 byte)
00404060
Description
value (4 bytes)
Terminal offset
value
Command Control
423