Omron FQ2-S/CH Series User Manual page 423


Acquire Camera Parameter
This command acquires the value of the specified camera parameter.
Camera parameter numbers: p. 229
Command Format
MRC SRC Sensor command code (4
(1 byte) (1 byte) bytes)
28 0F 00401040
Response Format
MRC SRC MRES
(1 byte) (1 byte) (1 byte)
28 0F End code
End Codes
End code (hex)
0000 Command execution ended normally.
FFFF Command execution ended in an error.
Parameter Descriptions
Camera parameter num- Specifies the number that corresponds to the camera parameter to be acquired.
*
ber
Acquired value Returns the specified camera parameter.
FQ2-S/CH User's Manual
for Communications Settings
Camera parameter number
(4 bytes)
3 digits max.
SRES Sensor command code (4 bytes) Acquired value
(1 byte)
00401040
Description
(4 bytes)
Dependent on the
camera parameter
(1,000 times the
actual value)
Command Control
421