Omron FQ2-S/CH Series User Manual page 449


Save Model Dictionary Data
Saves the specified number of model dictionary data as a file to the SD card inserted in the Touch Finder.
The destination for model dictionary data is the following fixed directory on the SD card.
\Sensor name\DIC
Format
MRC SRC Sensor command code (4
(1 byte) (1 byte) bytes)
28 0F 0070C000
Response Format
MRC SRC MRES
(1 byte) (1 byte) (1 byte)
28 0F End code
End Codes
End code (hex) Description
0000 Command execution ended normally.
FFFF Command execution ended in an error.
Parameter Descriptions
Model dictionary number Specifies the scene number (0 to 31) to be saved.
Model dictionary data file Specifies the file name when saving.
name The file name extension (.dic) can be omitted.
Important
• If the specified file name already exists, this existing file will be overwritten.
• Do not turn off power to the Sensor until there is a response.
FQ2-S/CH User's Manual
for Communications Settings
Model dictionary
number to be
saved (4 bytes)
2 digits max.
SRES Sensor command code (4 bytes)
(1 byte)
0070C000
Model dictionary
data file name
(4 to 64 bytes)
64 characters
max.
447
Command Control