Omron FQ2-S/CH Series User Manual page 446


Save All Setting Data
This command saves all setting data (all scene data, system data, calibration group data) for the Sensor to the
SD card inserted in the Touch Finder as a backup file.
The destination for backup data is the following fixed directory on the SD card.
\Sensor name\BKD
Format
MRC SRC
(1 byte) (1 byte)
28 0F
Response Format
MRC SRC
(1 byte) (1 byte)
28 0F
End Codes
End code (hex)
0000
FFFF
Parameter Descriptions
All setting data file name This command specifies the all setting data backup file name.
Important
Do not turn off power to the Sensor until there is a response.
444
Command Control
Sensor command code (4
bytes)
00705000
MRES SRES
(1 byte) (1 byte)
End code
Command execution ended normally.
Command execution ended in an error.
The file name extension (.bkd) can be omitted.
All setting data file name
(4 to 64 byte)
64 characters max.
Sensor command code
(4 bytes)
00705000
Description
FQ2-S/CH User's Manual
for Communications Settings