Omron FQ2-S/CH Series User Manual page 165

 Commands to Get Status
Command code in
command area (hex)
00201000 Get Scene Number
 Commands to Set Status
Command code in
command area (hex)
00301000 Select Scene
 Commands to Read Data
Command code in
command area (hex)
00401010 Get Image Adjustment Item
Data
00401020 Get Inspection Item Data
00401040 Acquire Camera Parameter
00402000 Acquire Date and Time
00403000 Get Software Version Informa-
tion
00404010 Acquire System Data
00404060 Acquire Terminal Offset Data
00406010 Acquire Statistical Data
00205000 Get Latest Error Information
00207010 Acquire Communication Input
Status
FQ2-S/CH User's Manual
for Communications Settings
Command name
Acquires the scene number currently being
used.
Command name
Changes the scene number to be used.
Command name
Acquires parameters and measurement val-
ues for a position compensation item or filter
item.
Acquires parameters and measurement val-
ues for the specified inspection item.
Acquires the value of the specified camera
parameter.
Acquires the current date and information.
Acquires the Sensor's software version.
Acquires the value set for the specified sys-
tem data.
Acquires the terminal offset data that is
added to the IN0 to IN4 command parame-
ters when executing parallel commands.
Acquires the statistical data (such as the
number of measurements, number of NG
overall judgments, and other information,
since the power supply was turned ON) held
by the Sensor.
Acquires the latest error information from the
Sensor.
Acquires the input status (allowed/prohib-
ited) for the communications protocol set with
the Set Communication Input Status com-
mand.
Outputting Data and Controlling Operation through PROFINET
Function
Function
Function
Reference
p.226
Reference
p.226
Reference
p.227
p.228
p.229
p.246
p.232
p.233
p.237
p.238
p.239
p.240
163